1.3 Technical Characteristics
Voltage
Frequency
Power Rating
Consumption
Height
Width
Length
Net weight
Gross weight
Cup maximum capacity
Rotation
(*) Voltage will be only the one indicated on motor characteristics label.
2. Installation and Pre-operation
2.1 Installation
To achieve a good performance the TA-04 GOURMET Blender shall be
installed on a steady and flat surface about 850 mm above the floor .
The TA 04 Blender has been designed for 110 V (60 c/s) or 220 V (50 c/s or
60c/s ) voltages . Check the voltage , to be sure the electric source has the same voltage
indicated on the label placed on the cord .
The cord plug has two round pins. It is mandatory to have the cord plugged
into the socket before to Switch ON the machine .
2.2 Pre-Operation
When placing the Bowl No. 02 ( Pic. 01) , check if it is well fitted . The fitting
system assures the Bowl to be steady in eight positions , therefore giving a
perfect performance guaranty .
Before to start be sure the Blender is perfectly steady . It is recommended to
work with the machine placed on a 850 mm high table .
Before to use it , the parts to be in contact with the product to be processed shall
be washed with water and soap . To clean your TA-04 read item No. 3.3 Cleaning Pg 03 .
You should not...
... expect your blender to replace any other kitchen appliance. It is not supposed to make
mashed potatoes, it does not blend egg white or any other cream for covering, it does not
grind raw meat, it does not blend hard pastas and not extract pulp from fruits and
vegetables.
...process blending for too long. Remember that the blender works in seconds and not in
minutes. Therefore, never let your blender working for more than one minute. It is better no
turn it off and check the mixing consistency after a few seconds to avoid too much blending.
02
Tabela - 01
[V]
110 or 220 *
50 / 60
[ c/s ]
1650
[w]
[kw/h]
1,65
[Inches]
21 7/8"
[Inches]
9"
[Inches]
7 7/8"
[lb]
8.8
[lb]
17.6
[l]
4
[ rpm]
38000
Important