Bluetooth Operation - Roadstar HIF-1999D+BT Manual De Instrucciones

1. Press FUNCTION BUTTON (6) to select "USB" mode.
2. Plug-in the usb plug with the face up & make sure it going into comple-
tely.
3. The system will start reading the storage media automatically after
connecting, and lcd display (18) will show the total number of mp3/
wma files
4. Repeat the same playback procedure as playing cd/mp3 disc as abo-
ve.
REMARKS:
The system can detect and read the file under mp3 and wma format

only though the usb port.
If connect the system to mp3 player via the usb socket, due to varian-

ces in mp3 encoding format, some mp3 player may not be able to play
via the usb socket. this is not a maul-function of the system.
Connecting the usb upside down or backwards could damage the au-

dio system or the storage media (usb thumb drive). Check to be sure
the direction is correct before connection.
LISTENING TO TAPE
1. Set the FUNCTION BUTTON (6) to "TAPE" mode. The system will
start playback automatically after inserting the cassette tape.
2. Press CASSETTE STOP/EJ BUTTON (30) half inwards during
playback mode. The tape will wind forward.
3. Slightly press the CASSETTE STOP/EJ BUTTON (30) again to resu-
me playback.
4. Press the CASSETTE STOP/EJ BUTTON (30) completely inwards and
the cassette tape will be ejected through the CASSETTE DOOR (17).

BLUETOOTH OPERATION

1. Press the BT button, the BT indicator will light up.
2. Select from your portable device (Smartphone, Tablet...) the ID Blueto-
English 11 12 English
oth tagged as "CBT", then confirm connection.
3. Now you can transfer the music to the HIF-1999D+BT and all opera-
tions can only be operated from your mobile device.
ENCODING FROM RADIO
Plug USB Disk into USB socket. During FM playing mode, press the RE-
CORD BUTTON (9) one time, the "USB" on the display will flash after 5
seconds and the recording is starting. Press the PLAY/PAUSE BUTTON
(2) one time to stop the recording and "USB" will not flash; press the
PLAY/PAUSE BUTTON (2) again to resume to record and "USB" will flash
again.
ENCODING FROM CD
Plug USB Disk into USB socket. During CD playing mode, press the RE-
CORD BUTTON (9) one time, "REC-1" will show on the display: press the
RECORD BUTTON (9) secondly to record the playing track; or press the
SKIP UP BUTTON (3) one time to choose to record whole file in the CD
and "REC-A" will show on the display.
ENCODING FROM CD-MP3
Plug USB Disk into USB socket. During MP3 playing mode press the RE-
CORD BUTTON (9) one time, "REC-1" will show on the display; then press
the RECORD BUTTON (9) secondly to confirm, "REC"" will flash and
start to record after 5 seconds; or press the SKIP UP BUTTON (3) one
time to choose to record all the file in the playing folder and "REC-F" will
show on the display; or press the SKIP UP BUTTON (3) twice to record
the file in the whole playing MP3 disc and "REC-A" will show on the
display.
ENCODING FROM CASSETTE
Plug USB Disk into USB socket. During TAPE playing mode, press the
RECORD BUTTON (9) one time, "USB" will show on the display, then
press the RECORD BUTTON (9) secondly to confirm, "USB" will flash and