Playing Compact Disc - Roadstar HIF-1999D+BT Manual De Instrucciones

7. Gently lower the tone arm onto the record with the Tonearm Lift lever
to start playing.
8. When the record is finished the tonearm will automatically stop and
return automatically to the rest. To stop manually, lift the tonearm from
the record and return it to the rest.
Notes: Do not stop or turn the platter manually. Moving or jarring the tur-
ntable without securing the Tonearm clamp could result in damage to the
Tonearm. Replace the protective cap on the stylus when not in use.

PLAYING COMPACT DISC

To start
1. Press FUNCTION BUTTON (6) to select "CD" mode.
2. Press "open/close" button (11) to open the cd door (10).
3. Place a cd with the printed side facing up inside the tray & then close
the co door.
4. Focus search is performing, the first track will start playback.
5. To interrupt, press the STOP BUTTON (26) once, the total number of
tracks compare on the lcd display (18). Press again PLAY/PAUSE
BUTTON (2) to resume normal playback.
Skip/search mode (skip/search up / skip/search down)
During play or pause mode, if SKIP UP BUTTON (3) is pressed. it will

go to next track and display the track no. and then remain the play or
pause mode.
During play or pause mode, if SKIP DOWN BUTTON (4) is pressed. it

will go back to the beginning of the track, original track number is
display and remain the play or pause mode.
After step 2, press SKIP DOWN BUTTON (4) again will go to the pre-

vious track and remain the play or pause mode.
If press and hold the SKIP UP BUTTON (3)/SKIP DOWN BUTTON (4)

during cd/mp3 playabck, the playing track will go fast forward or ba-
English 9 10 English
ckward until the button being released.
To skip 10 tracks UP or DOWN press the TRACK +10 or TRACK -10

button on Remote Control.
REPEAT/RANDOM MODE
Press the PLAY MODE BUTTON (5) to activate this function. All the tracks
can be played in difference mode as follow:
Repeat play: you can listen the desired tracks or folder repeatedly by

this function.
Random play: you can listen all the tracks or folder in a random order

by this function
CD DISC PROGRAMMING
Up to 99 tacks can be programmed for mp3 (20 in CD) and play in any
order. before use, be sure the system is at stop mode before program-
ming:
1. In cd mode and stop the cd playback.
2. Press the PROGRAM BUTTON (46), "P" will appear on lcd display
(18). Moreover, it will indicate program no. and digits for track no. to be
programmed.
3. Select a desired track by pressing SKIP UP/DOWN BUTTONS (3)/(4).
4. Press the PROGRAM BUTTON (46) to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if ne-
cessary.
6. When all the desired tracks have been programmed, press PLAY/
PAUSE BUTTON (2) to play the disc in assigned order.
7. To cancel the programmed file, press STOP BUTTON (26).
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3 /wma file which stored
in the memory media with usb connecting port.