How to Use Accessory
Tray
The unit is equipped with an accessory tray with places
to store your ProjectPro
TM
nozzles, HydroFoam
TM
launcher, spray gun and nozzle extension. Identify all
accessories with the illustration on page 6.
NOTE: The extra hole in the tray is for storing a utility
brush. The extra clip in the tray is for storing a turbo
nozzle. The brush and turbo nozzle are NOT included
with your pressure washer. You can buy these items
as optional accessories.
1.
Place nozzle extension through hole on accessory
tray, as shown.
Follow these instructions to change ProjectPro
TM
no771es:
1.
Engage trigger lock on spray gun.
CAUTION
,
,
NEVER exchange ProjectPro
TM
nozzles without locking
the trigger lock on the trigger.
DO NOT twist ProjectPro
TM
nozzles while spraying.
Pull back collar on quick-connect
and pull current
ProjectPro
TM
nozzle off. Store ProjectPro
TM
nozzles
in holder
provided
on the accessory
tray.
Select
desired
ProjectPro
TM
nozzle:
•
For delicate
rinse (lower
pressure
and higher
flow), for gentle
cleaning
of cars/trucks,
boats,
RV's, patio furniture,
lawn equipment,
etc.,
select yellow
delicate
ProjectPro
TM
nozzle.
2.
Place spray gun through hole on accessory tray
on right side of unit.
3.
Insert multi-colored
ProjectPro
TM
nozzles in
spaces provided in accessory tray.
4.
Insert HydroFoam
TM
launcher in space provided in
accessory tray next to the multi-colored
ProjectPro
TM
nozzles.
How to Use ProjectPro
TM
Nozzle System
The quick-connect
on the nozzle extension allows you
to switch between three different ProjectPro
TM
system
nozzles. The ProjectPro
TM
nozzles vary the pressure
and spray pattern as shown.
High Pressure
i ..........
Delicate
40 ° Yellow
1750 PSI
2.3 GPM
General
Max
15 ° Orange
0 ° Red
2200 PSI
2550 PSI
2.2 GPM
2.0 GPM
For general rinsing (medium pressure and
medium flow), ideal for most all purpose
cleaning such as home siding, brick patios,
wood decks, driveways and sidewalks, garage
floors, etc., select orange general ProjectPro
TM
nozzle.
12