Before First Use - Oster BCSTFP0000 Manual De Instrucciones

Before First Use

1. Make sure the appliance is turned off and the power cord is unplugged.
2. clean all PaRts (see "cleaning and Maintenance").
• NEVER IMMERSE THE STEAM/ BLEND BASE OR APPLIANCE BASE IN ANY LIQUID OR
PLACE IN THE DISHWASHER.
• CAUTION: THE BLADES ARE EXTREMELY SHARP . BE CAREFUL WHEN HANDLING
DOUBLE EDGE CUTTER BLADES.
assembling the Steam/Blend Container
before using the steam/blend container to steam or process food, make sure the
steam/blend lid, steam/blend screen, stainless steel blade and steam/blend base are
securely assembled.
Opening and Closing the Steam/Blend Container Lid (1)
1. to open, press and hold the lid release button (7), and twist the steam/blend lid
(2) from locked
2. to close, twist from unlocked
button (7) engages with the slot in the tab on steam/blend lid (2) and the lid is
secure.
* the steam/blend screen must be installed for the lid to assemble to the
steam/ blend container (see "attaching and Removing the steam/blend
screen" instructions below).
* the steam/blend screen is not required when steaming with the tri-level
steam trays (see "steaming with the tri-level steam trays" instructions for
assembling and operating this module).
attaching and removing the Steam/Blend
Screen (4)
1. to remove, pull the steam/blend screen (4) tab away from steam/blend lid.
2. to attach, align the center of the steam/blend screen (4) with the metal rod on
the bottom of the steam/blend lid (2). align the steam/blend screen tab between
the two tabs on the steam/blend lid. Press the tab on the screen down until it
clicks into the steam/blend lid (2).
3. for maximum performance, make sure that the steam channels are well ad-
justed. Remove vapor channels to thoroughly clean. once cleaning is complete
be sure to securely affix channels back in place.
attaching and removing the
Stainless Steel Blade (5)
1. once the steam/blend lid (2) is removed, the stainless steel blade (5) can be
easily dropped onto the center column in the steam/blend container (1)
for use. Place stainless steel blade axel on bottom part of vaporizer/processor jar
and turn it until it is tightly fitted with the blade in the closed position.
2. the stainless steel blade (5) is easily removed by pulling it from the steam/
blend container (1).
CAUTION: tHE bladE is sHaRP . HandlE caREfullY fRoM tHE toP of
tHE bladE.
to unlocked .
to locked until the notch on the lid release
Nutrition Center
6
English