2.
SAFETY PRECAUTIONS
2.1 Precautions
WARNING!
The Manufacturer declines all responsibilities if the precautions below are not taken.
The accomplishments concerning working environment safety and health regulations indicated by the current laws
(2003/10/CE Directive, 2002/44/CE Directive and 81/2008 Law Decree) have to be carried out either by the end-user or
by the employer: supply of the adequate individual protecting devices, information about working risks, sanitary
survey, etc...
The over-exposure to the vibrations may cause neurovascular lesions to people suffering from circulatory disorders.
In case of symptoms which could be referred to, such as an over-exposure, a specialist has to be contacted.
These symptoms can be torpor, loss of sensitivity, sharp pains, itch, strength reduction or loss, complexion
discoloration or structural modifications. This usually happens in one's hands, wrists and fingers.
2.1.1 Results of the tests carried out according to the Laws
WARNING!
Risks due to the operator's contact with the tool and/or machine noise and vibrations.
Product assembling possibilities: the following is a list of the possible components combinations in order to create the most
adequate tool for the task to be carried out:
1 - Power unit POWER MOTOR
Campagnola Srl - USE AND MAINTENANCE MANUAL – Traslation of the original Instructions
Ver.1.0 - Rev.: 00, Data: 20/10/2016
ASSEMBLING POSSIBILITIES
Extension pole
6 – Alice harvesting
5
head
4
3
2
7 – Hercules harvesting
head
Pag.19