Maintenance And Repairs; Changing The Battery - Bosch BCR1 Serie Instrucciones De Uso

Maintenance and repairs

52
a
53
b
1
2
c
d
108

Changing the battery

!
Caution
Switch off the robot vacuum before changing the bat-
tery.
Information
Like all li-ion batteries, the Roxxter battery is subject to
natural wear. This means that the battery capacity and
consequently battery life will decrease over time.
This aging process is natural and not the result of a ma-
terial defect or manufacturing error.
52
Fig.
The battery is on the underside of the robot vacuum.
Use an appropriate Pozidrive crosshead screwdriver to
unscrew and screw in the screws. You can also use a
PZ2 screwdriver.
53
Fig.
a) Unscrew the two screws on the battery and remove
the old battery.
b) Unlock the lock on the battery connection and pull
the connector out.
Information
Only use the original Bosch Roxxter battery.
Plug the connector of the new battery into the con-
nection on the robot vacuum.
Position the connection cable with connector in the
recess on the left-hand side of the battery compart-
ment.
c) Hold the connector in this position and place the new
battery in the battery compartment.
d) Screw the battery into the robot vacuum by hand.
!
Caution:Please dispose of the battery in an environ-
mentally friendly manner
Batteries contain substances that should not be re-
leased into the environment.
Please dispose of the battery at a designated collec-
tion point.
en