Vermeiren Ceres 3 Manual De Instrucciones página 21

Locking the seat in place (Fig. A)
Do the reverse when you want to replace the seat.

Pull the seat lever  up and at the same time put the seat  on the adjustment bar  and press
as far down as it will go.

When you hear the seat lock in place, the seat lever  must be in a horizontal position. If it is still
pulled upward, the seat has not been locked in place yet.
Swivel seat (Fig. A)

Pull the seat lever  upwards.

Turn the seat  in the desired direction.

Release the seat lever , and the seat will always stop after 20°.

Check that the seat is firmly secured.
Depth adjustment (Fig. A)

Pull the seat depth adjustment lever
 
Move the seat forward or backward over the seat depth rails

To lock the seat in place, let go of the lever

Swivel the seat a little until it locks in position.

Check the seat is locked securely.
Fig. A
Seat height adjustment (Fig. B)
The seat can be adjusted in 4 different seat heights (increments: 25 mm).

Remove the seat.

Remove the plastic rear cover.
 
Loosen the screw

Remove the safety pin

Move the adjustment bar
comfortable seat height.

Replace the safety pin
 
Fasten the screw

Replace the plastic rear cover.

Replace the seat.

Check the seat is locked securely.

upwards.

a little bit.
.

upwards/downwards in the receiver, and place these in a

.
and check that the play of the seat is reduced.
Page 19

.

once the seat has reached the desired position.
1 = Seat lever
2 = Seat
3 = Seat depth adjustment lever
4 = Seat depth rails
5 = Adjustment bar
Ceres 3, Ceres 4
2015-03