Tabla de contenido
Automatic
Bu_onhole
(Continued)
(_ Guide slot
(._ Guide block
(_ Buttonhole guide plate
(_ Buttonhole template
(_ Catch
Setting mark
(_ Gear
(_ Base plate
After you select a template
_ with the style and size
of buttonhole,
slide the template
into the guide plate
3_. Pull the catch @ toward
you while sliding
the
template
4_ until the selected
buttonhole
is at the
setting
mark C6_. Insert the gear of base plate (_ into
the guide slot of template
(_ and fit the guide block
2_ into the center of the guide slot.
(_ Needle thread
(_ Bobbin thread
(_) Buttonhole foot
(_) Gear
(_) Slot
(_ Starting point
Attach
the buttonhole
foot (_.
Adjust the position
of
gear (_) so it is aligned with the starting
point of the
template
(_.
The lever can be used to change
gear
positions.
Pull the bobbin
thread
up through
the
guide slot of the buttonhole
guide plate by turning
the handwheel
counterclockwise
while holding the
needle thread.
Place the bobbin
and needle threads
to the left side of the guide plate.
Leave 7 to 10 cm
(3 to 4") of threads.
78
Tabla de contenido
