Tabla de contenido
iVluitiple Zigzag
Stitch
Stitch width:
5
Stitch length:
0.5 to 1
Needle thread tension:
2 to 6
L'_ Presser foot A:
Zigzag foot
This is used to finish seam allowance
on synthetics
and other fabrics
that tend to pucker.
The stitch is
also excellent
for darning
and mending
tears.
[]
Seam finishing
Place fabric under the presser foot [A] in such a
manner that the edge is slightly
inside the right-hand
side of the presser foot.
Guide the fabric so that the
right-hand
stitches
fall at the edge of the fabric.
[]
Mending
Position
the tear under the needle so that the stitch
catches
both side.
\
[]
[]
>
WID'Prl
I
®
LENGTH
!
@
®
.
i
•
+
*%
•
Shell Stitch
0
Stitch width:
(_) Stitch length:
(_) Needle thread tension:
(_ Presser foot F:
3to5
Red zone
4to9
Satin stitch foot
Use a lightweight
fabric such as tricot,
Fold the
fabric and stitch on the bias.
You may need to
increase the needle thread tension
slightly.
Allow the
needle to just clear the folded
edge of the fabric at
the zigzag stitches.
If you sew rows of shell stitches,
space the rows at
least 1.5 cm (5/8") apart.
You can also sew shell
stitches
on knits or soft silky woven fabrics
in any
direction.
(b
WIDTH
®
I.ENGTH
8
®
54
Tabla de contenido
