Tabla de contenido
o Bobbin Winding
@ Forhorizontal spool p in
(_ Foradditional spool p in
(_ Pullthe clutch knob out to disengageclutch.
(_) Drawthreadfrom spool.
® Guidethe threadaroundthe thread guide.
(_) Threadthroughthe hole in the bobbinfromthe
insideto the outside.
® Putthe bobbinon the bobbin winderspindle.
® Pushthe bobbinto the right.
(_ Withfree end of the threadheld in your hand,
depressthe foot control. Stop the machine
when it hasmadea few turns, and cut the thread
closeto the hole in the bobbin.
® Depress the foot controlagain. Whenthe bobbin
is fully wound, it stops automatically.Returnthe
bobbinwinderto its original positionby moving
the spindleto the left and cut the threadas
shown.
(_ Pushthe clutch knob in to engageclutch.The
machinewill not function until the clutch is
engaged.
NOTE:
Position
of the bobbin
winder
stopper
is
adjustable
for the required
amount
of
thread
on the bobbin
(example
1/2 full or
full etc.).
Use a screwdriver
and loosen the screw
one turn or less so that you can adjust the
position
of the bobbin
winder
stopper.
Do not take out the screw all the way.
f
®
®
%
®
®
f
,®®
J
®
f
_®
/I
2O
Tabla de contenido
