Resetting The Unit; Switching The Fm/Am Tuning Step; Setting The Clock; Preparing A Bluetooth Device - Sony MEX-M71BT Manual De Instrucciones

Resetting the Unit

Before operating the unit for the first time,
or after replacing the boat battery or
changing connections, you must reset the
unit.
1
Press DSPL and
more than 2 seconds.
Note
Resetting the unit will erase the clock setting and
some stored contents.
Switching the FM/AM
Tuning Step
Set the FM/AM tuning step of your country.
This setting appears only while the source
is off and the clock is displayed.
1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
2
Rotate the control dial to select [SET
TUNER-STP], then press it.
3
Rotate the control dial to select from
[SET 50K/9K], [SET 100K/10K] or [SET
200K/10K], then press it.

Setting the Clock

1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
2
Rotate the control dial to select [SET
CLOCK-ADJ], then press it.
The hour indication flashes.
3
Rotate the control dial to set the hour
and minute.
To move the digital indication, press
/ (SEEK –/+).
4
After setting the minute, press MENU.
The setup is complete and the clock
starts.
To display the clock
Press DSPL.
10
GB
(back)/MODE for
Preparing a BLUETOOTH
Device
You can enjoy music, or perform handsfree
calling depending on the BLUETOOTH
compatible device such as a smartphone,
cellular phone and audio device (hereafter
"BLUETOOTH device" if not otherwise
specified). For details on connecting, refer to
the operating instructions supplied with the
device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound
may result.
Connecting with a Smartphone by
One touch (NFC)
By touching the control dial on the unit with
an NFC* compatible smartphone, the unit is
paired and connected with the smartphone
automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as mobile phones
and IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated
location on NFC compatible devices.
For a smartphone with Android OS 4.0 or
lower installed, downloading the app "NFC
Easy Connect" available at Google Play™ is
required. The app may not be downloadable
in some countries/regions.
1
Activate the NFC function on the
smartphone.
For details, refer to the operating
instructions supplied with the
smartphone.
2
Touch the N-Mark part of the unit
with the N-Mark part of the
smartphone.