Bluetooth ® Pairing - Hama MyVoice 600 Instrucciones De Uso

4. Getting Started
• The headset is equipped with a rechargeable battery. The battery
must be fully charged before using the device for the first time.
• Ensure that the headset is switched off before charging it.
• Begin charging by connecting the included USB charging cable to
the charging socket (2) as well as to the USB connection of a PC/
laptop.
• Alternatively, you can charge the headset using a suitable USB
charger. Please refer to the operating instructions for the USB
charger used.
• The status LED (3) lights up constantly in red during the charging
process.
• Charging the battery fully may take up to 2 hours.
Warning
Do not use the headset while it is charging.
• When the battery is fully charged, the status LED (3) is constantly
lit blue.
• Disconnect all cable and mains connections after use.
Note
If you have not used the item for a few month, it may take 15-30
minutes for the status LED (3) to red when charging.
5. Operation
Switching the headset on/off
• Turn On:
With the device off, press and hold the multi-function key (1) for
3 seconds until you hear a short tone. The LED indicator (3) lights
up blue and a voice says, 'Power On'.
• Turn Off:
With the device on, press and hold the multi-function key (1)
for 10 seconds until you hear a long tone. The LED indicator (3)
briefly lights up red and a voice says, 'Power Off'.
The first time the device is turned on, pairing is automatically started
– see 5.1 Bluetooth
5.1. Bluetooth
Note – Pairing
• Make sure that your Bluetooth
and Bluetooth
• For more information, please refer to the operating instructions of
your terminal device.
4
pairing.
®
pairing
®
is activated.
®
-capable terminal device is on
®