Tecno-gaz PURA 10 BIOX Manual Del Usuario página 67

(Operation) EARTHING
~
Alternating current
Caution high voltage risk of electric shock!
Carefully read the instructions manual
Applied part.
Position (number to which the component corresponds in figures or
POS.
diagrams ).
Fg.
Figure.

Ohm (unit of measurement of electrical resistance).
s
Seconds (time unit of measurement).
W
Watt (Power unit of measurement).
Hz
Hertz (Frequency unit of measurement)
mm
Millimetres (length unit of measurement).
A
Ampere (current unit of measurement).
V
Volt (voltage unit of measurement).
°C
Degrees Celsius (temperature unit of measurement).
kg
kilograms (Mass unit of measurement).
1st level machine operator: operator with no specific skill, able to
perform only simple tasks such as the Machine control by means of the
buttons on the boards and to feed the device with consumables
necessary for the correct operation of the same device.
Mechanic/hydraulic maintenance operator: qualified technician, able
to control the Machine under normal operating conditions and to
repair and replace mechanic/hydraulic components composing the
machine or relating to the machine operation. They are not usually
entitled to carry out interventions on live electrical systems.
Electrical maintenance operator: qualified technician, able to control
the Machine under normal operating conditions and to repair and
replace electrical/electronic components of the machine or relating to
the machine operation. They are able to carry out interventions on live
electrical cabinets or shunt boxes.
7
ENGLISH