Idiomas disponibles
Idiomas disponibles
7.
Select SOIL LEVEL
Light
Medium
•
•
Soil Level
Once you select a cycle, select
the soil level by turning
the
Soil Level knob to the desired
setting.
9.
Select options (on some models)
One
Two
Rinse
Rinses
Off
On
•
®
@
®
(I
Rinse
Stain Boost
Select the desired
cycle
options, turn the knob to desired
setting.
r
8.
Select WASH
TEMPERATURE
Cool
Cool
Lights
Darks
e
Warm
Cold
Hot
®
®
Wash Temp
After selecting
the load size, select the Wash Temperature
by
turning
knob to desired
temperature.
All rinses are tap cold.
NOTE: Always
read and follow
fabric
care
label instructions
to avoid
damage
to your garments.
Wash Temp
Hot
Some cold water
is added
to save energy.
This may be
cooler
than your hot water
heater
setting.
Warm
Some cold water
may be
added,
so this will be cooler
than what your previous
washer
provided.
Cool
Lights
Warm
water
is added
to assist
in soil removal
and to help
dissolve
detergents.
Cool is
slightly
warmer
than cold.
Cool
Darks
Warm
water
is added
to assist
in soil removal
and to help
dissolve
detergents.
Cool is
slightly
warmer
than cold.
Cold
Warm
water
may be added
to assist in soil removal
and to
help dissolve
detergents.
Suggested Fabrics
Whites
and pastels
Durable
garments
Heavy soils
Bright colors
Moderate
to light soils
Colors that bleed
or fade
Light soils
Dark colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils
f|0. _ "
Press START/PAUSE/Unlock
Lid
to begin
wash cycle
(_
START
PAUSE
UNLOCK
LID
CANCEL
HOLD
3 SEC
Press the START/PAUSE/Unlock
Lid button
to start the wash
cycle. When
the cycle
has finished,
the Cycle Complete
status light will light. Promptly
remove
garments
after
cycle
has completed
to avoid
odor, reduce
wrinkling,
and rusting
of
metal
hooks, zippers,
and snaps.
Adding
garment(s)
During
the Fill/Sensing
phase, open
lid and add 1 or 2 missed
garments.
Then close lid and press START/Pause
to restart
the cycle. If you need to open the lid to add a garment
after
this point, you must press START/Pause
and wait for the lid to
unlock.
This may take several
minutes
if the load was spinning
at a high speed. You may hear a winding
sound as the basket
slows down. Then add garment,
close lid, and press START/
Pause again
to resume the cycle.
NOTES:
[]
Washer
will fill with the lid open.
[]
If your washer
does not have a soak option,
then pause
your washer
to soak. When
you are done
soaking
then press
Start/Pause
button
to bring
washer
out of Pause.
iMPORTANT:
If lid is left open for more than 10 minutes,
the
water
win pump
out automatically.
