Idiomas disponibles
Idiomas disponibles
Maximum speed of the output shaft.
The product can cause objects to eject,
which can cause injury.
Keep a minimum of 15 m distance to
persons and animals during operation of
the product.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Be careful of blade thrust.
Only use flexible cutting wire. Do not use
metal cutting attachments.
Air purge bulb.
Choke.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
4
Used if there is a risk of
yyyywwxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown
to meet Federal emissions requirements. Maintenance,
replacement or repair of the emission control devices
and system may be performed by any nonroad engine
repair establishment or individual.
Customer assistance
For customer assistance, call: 1-800-487-5951 or visit
www.husqvarna.com.
Product damage
We are not responsible for damages to our product if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Safety
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week.
Used if there is a risk of
2227 - 002 - 19.07.2024
