Warning And Danger Signs; Safety Protections And Devices; Work Stations; Vibration - Tre Spade TC 12 PRO INOX DELUXE Manual De Instrucciones

Meat mincer model .....................................
Serial N. ......................................................
Year of manufacture ...................................
Type ..............................................................
WARNING!
Do not alter the data on the nameplate
under any circumstances.

1.7.1 - WARNING AND DANGER SIGNS

WARNING!
With the machine connected to the power supply,
do not work on the electrical components. You
risk electrocution. Observe the warnings on the
nameplate. Failure to comply may result in personal
injury. Make sure the nameplate is always present
and legible. If it is not so, apply or replace it.
A = meat mincer model
B = serial number
C = year of manufacture
D = gearmotor code
E = power consumption
F = motor speed
G = current consumption
H = voltage
I = frequency
J = degree of protection
A
TRE SPADE

1.8 - SAFETY PROTECTIONS AND DEVICES

WARNING!
Before using the machine, ensure that safety
devices are properly positioned and efficient. Check
their presence and efficiency at the beginning of
each work shift. If this is not the case, notify the
person in charge of maintenance.
2
1. Protective guard for electrical components
The machine is closed by a guard that prevents
fig. 1.7.1
unintentional access to electrical components.
2. Magnetic reset switch
On the machine casing there is a magnetic reset
switch that prevents automatic restart in case
of power supply resumption after a momentary
interruption.
WARNING!
Do not under any circumstances tamper with the
safety devices
A

1.9 - WORK STATIONS

The correct position to be occupied by the operator
is shown in fig. 1.9.1.
1.10 - VIBRATIONS
The vibrations that the
machine transmits to the
bench are not significant.
17
fig. 1.8.1
1
A
fig. 1.9.1
Made in Italy