Idiomas disponibles
Idiomas disponibles
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
m WARNING!
The product and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!
9.
Before commissioning
In accordance with the applicable regulations, the
high-pressure cleaner must never be operated in the
drinking water network without a system separator.
A suitable system separator in accordance with EN
12729 type BA must be used.
Water that has flowed through a system separator
backflow prevention device is considered non-pota-
ble. A system separator is available from specialist
dealers.
A system separator (backflow preventer) prevents wa-
ter and cleaning agent from flowing back into the drink-
ing water pipe.
• Use a standard 1/2" garden hose with at least
5 m length for the water inlet. Do not exceed 30 m
length.
• Use the product with a domestic water connection
with at least 500 l/h flow rate.
• You can also use the product independently of the
water supply (e.g. rain barrel) thanks to the integrat-
ed water suction function. This function can only
be used with a suction hose with filter basket. A
suction hose with filter basket is not included in the
scope of delivery.
10. Assembly (Fig. 1 + 2)
1.
Place the product upright on a level, firm surface.
2.
Insert the coupling plug of the high-pressure hose
(3) into the high-pressure hose connection of the
spray gun (20) so that it latches into place. Make
sure that the high-pressure hose (3) is not routed
through the U-shaped handle (1).
3.
Screw the coupling for the water connection (25)
onto the water connection (8).
24 | GB
4.
Use a garden hose with quick coupling (not includ-
ed in the scope of delivery) and connect it to the
water connection coupling (25).
5.
Depending on the work you want to do, connect the
lance (2) or the rotating brush (10) to the spray gun
(9) by plugging it in and turning it (bayonet lock).
6.
Once the lance (2) is mounted, connect either the
variable nozzle (6) or the turbo nozzle (24) to the
lance (2). To do this, insert the attachments into
the lance (2) so that they latch into place. To re-
move the attachments, press the nozzle release
button (18) on the front end of the lance (2) and pull
the attachment off towards the front.
11. Starting operation (Fig. 1 + 2)
m Attention!
Always make sure the product is fully assembled
before commissioning!
Selecting attachments
Choose a suitable attachment depending on the work
you need to do:
Variable nozzle (6): The variable nozzle (6) with its flat
jet is particularly suitable for surface cleaning. You can
adjust the width of the water jet by turning the nozzle tip
(6.1). The working pressure can be adjusted by turning
the pressure regulator (6.2).
In low-pressure operation, the variable nozzle (6) can
also be used for spraying cleaning agents.
The pressure set can be read off on the operating pres-
sure indicator (23).
Turbo nozzle (24): With its rotating water jet, the turbo
nozzle (24) is particularly suitable for removing stub-
born dirt.
Rotating brush (10):
The rotating brush (10) is always used without applying
pressure. It is suitable for cleaning smooth surfaces.
The cleaning function results from the rotational move-
ment and the water flow. If there is no water flow, the
washing brush does not rotate.
11.1 Switching on
m WARNING! Pay attention to the recoil force
caused by the emergent water jet. Ensure that you
have secure footing and hold the spray gun (9) firm-
ly. Otherwise, you could injure yourself or others.
www.scheppach.com
