Idiomas disponibles
Idiomas disponibles
m WARNING! This power tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain cir-
cumstances. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operating
the power tool.
7.
Technical data
AC motor
Power
Length of mains connection
cable
Length of high-pressure hose
Weight
Protection class
Protection category
Design pressure / working
pressure (p)
Max. permissible pressure
(p max)
Max. supply pressure (p max)
Max. supply temperature (T
in max)
Rated flow rate (Q)
Max. Flow rate (Q
)
max
Subject to technical changes!
Noise and vibration
m WARNING! Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection for you and persons
in the vicinity.
The noise and vibration values have been determined
in accordance with EN 60335-2-79.
Noise data
Sound pressure level L
Uncertainty K
Sound power level L
Sound power level, guaranteed L
Uncertainty K
Vibration parameters
Vibration a
230-240 V~ / 50
Uncertainty K
Hz
2400W
The specified total vibration value and the specified
noise emission value have been measured in accord-
5 m
ance with a standardised test procedure and can be
used to compare one power tool with another.
8 m
The total noise emission values specified and the total
10 kg
vibration emission values specified can also be used
II
for an initial estimation of the load.
IPX5
m WARNING! The noise emission values and vi-
bration emission value can vary from the specified
120 bar (12 Mpa)
values during the actual use of the power tool, de-
pending on the type and the manner in which the
180 bar (18 Mpa)
electric tool is used, and in particular the type of
workpiece being processed.
4 bar
50°C
Try to keep the stress as low as possible. For exam-
ple: Limit working time. In doing so, all parts of the
5.5 l/min
operating cycle
8 l/min
must be taken into account (such as times in which
the electric tool is switched off or times in which it is
switched on, but is not running under a load).
8. Unpacking
• Open the packaging and carefully remove the prod-
• Remove the packaging material, as well as the pack-
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
• If possible, keep the packaging until the expiry of the
• Familiarise yourself with the product by means of the
www.scheppach.com
pA
pA
WA
WA
h
uct.
aging and transport safety devices (if present).
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
warranty period.
operating manual before using for the first time.
78 dB
3 dB
93 dB
94 dB
WA
3 dB
≤ 2.5 m/s
2
1.5 m/s
2
GB | 23
