HumanTechnik lisa Instrucciones De Servicio página 10

Converter 1
lisa radio
Important: Converter 1 lisa
"Transmit with delay" is pressed
Converter 1 lisa
"Transmit with delay" is not pressed
Channel selection
A special digital transmission pro-
cess ensures that the radio signals
are picked up without errors. This
process also makes it possible to set
10 different radio channels. When
supplied from the factory, all lisa
devices are set to channel 0. It is
only necessary to set units to other
channels if you have several diffe-
rent users operating units in the
same building.
Set the required channel by using a
small screwdriver to turn the channel
selector switch, which is located on
10 English
Maximum transmission range
radio :
radio :
Converter 2
lisa
the backside of the converter lisa
radio , to the required channel
number.
All transmitters and receivers must
be set to the same channel.
Example:
Set channel
number 0
radio