Idiomas disponibles
Idiomas disponibles
Install Instruction
Leveling feet
To avoid vibration, the appliance must be
leveled.
If required, adjust the leveling feet to
compensate for the uneven floor.
The front should be slightly higher than
the rear to aid in door closing.
Leveling feet can be turned easily by
tipping the cabinet slightly.
Turn the leveling feet counter clockwise
to raise the unit, clockwise
Door Handle Installation(Only
models with visible handle)
precautions shall be taken to prevent fall of
the handle from causing any personal injury.
List of tools to be provided by the user
Allen wrench
ATTENTION
Differences:
Due to technical changes
and different models, some of the illustrations
in this manual may differ from your model.
to lower it.
Screw hole
Screw
Door right-left change
List of tools to be provided by the user
Cross screwdriver
Putty knife / Thin-blade
screwdriver
Masking tape
5/16" socket spanner
1. Please power off this appliance before
conduct this operation. Remove all food
from door shelves.
2. Remove the decorative cover, hinge cover,
upper hinge, screws, disconnect the top
right signal line (1 2 signal line terminal),
disconnect the signal line (3 4 signal line
terminal).
decorative cover
3. Take off refrigerating chamber door,
middle hinge (use a allen wrench to
remove the middle hinge screw) and hole
cap of other side.
hole cap
4. Take off freezing chamber door,
dismantle bottom hinge, hole caps,
7
upper hinge
middle hinge
EN
