Idiomas disponibles
Idiomas disponibles
6
EN
INSTALL INSTRUCTION
Before first use
Remove the exterior and interior packing,
wipe the outside thoroughly with a soft dry
cloth and the inside with a wet, lukewarm
cloth.
Avoid placing the cabinet in a narrow recess
or near any heat source, direct sunlight, or
moisture.
Keep the air circulation free around the
cabinet. When installing the unit, ensure
10 cm of free space at both sides, 10 cm
at the top of the unit, and not more than
7.5 cm at the rear of the unit.
Before connecting your refrigerator to
the power supply, check that the voltage
stated on the rating label of your appliance
corresponds to the voltage in your home.
A different voltage could damage the
appliance.
The appliance must be grounded. The
manufacturer is not responsible for
damages that may occur as a result of
usage without grounding.
Space requirement diagram
B
A
B
700
1880
Notice: All dimensions in mm
C1
C
A
E
135
°
D
C
C1
D
666
600
1200
Connecting the appliance
After installing the product, please let it
stay for more than 2 hours before turning
on the power, otherwise it will lead to a
decrease in cooling capacity or a damage
to the product.
Allow the appliance to run empty for
2-3 hours(4 hours in summer when
the ambient temperature is high), so the
compartment can cool to the appropriate
temperature.
CAUTION
The refrigerator should always be plugged into
its own individual electrical outlet which has
a voltage rating that matches the rating plate.
When positioning the appliance, ensure the
supply cord is not trapped ordamaged.
Ambient Temperature
Depending on the climate class, this
refrigerator is intended to be used at an
ambient temperature range as specified in
the following table.
The product may not operate properly at
B
temperatures outside of the specific range.
You can find the climate class on the
product label.
Climate Class
SN
N
ST
T
If you have any doubts regarding installation, please
turn to the vendor, to our customer service or to the
nearest Authorised Service Centre.
ATTENTION
The cooling performance and power consumption
E
of the refrigerator may be affected by the ambient
1210
temperature, the door-opening frequency, and
the location of the refrigerator. We recommend
adjusting the temperature settings as appropriate.
Install Instruction
2 h
Ambient Temperature
+10 °C to +32 °C
+16 °C to +32 °C
+16 °C to +38 °C
+16 °C to +43 °C
