Idiomas disponibles
Idiomas disponibles
Install Instruction
Changing the light
Any replacement or maintenance of the
LED lamps is intended to be made by the
manufacturer, its service agent or similar
qualified person.
This product contains a light source of energy
efficiency class (F) in freezing chamber.
This product contains a light source of energy
efficiency class (G) in refrigerating chamber.
After connecting the power supply cord
(or plug) to the outlet, wait 2 or 3 hours
before you put food into the appliance. If you
add food before the appliance has cooled
completely, your food may spoil.
Moving the appliance
1. Remove all items from the appliance.
2. Pull the power plug out, insert and fix it
into the power plug hook at the rear or
on top of the appliance.
3. Tape parts such as shelves and the door
to prevent from falling off while moving
the appliance.
4. Move the appliance with more than two
people carefully. When transporting the
appliance over a long distance, keep the
appliance upright.
Tips for energy saving
Do not place the appliance near cookers,
radiators or other heat sources. If the
ambient temperature is high, the compressor
will run more frequently and for longer,
resulting in increased energy consumption.
Ensure that there is sufficient ventilation at
the base of the appliance, on the sides of the
appliance and at the back of the appliance.
Please also observe the spacing dimensions
in the chapter "Installation".
The arrangement of drawers, shelves and
trays as shown in the product overview
offers the most efficient use of energy and
should be retained as far as possible.
To obtain a larger storage space (e.g. for
large refrigerated/frozen goods), the middle
drawers and shelves can be removed. The
top and bottom drawers and shelves should
be removed last if necessary.
An evenly filled refrigerator/freezer
compartment contributes to optimal energy
use.
Allow warm food to cool before placing it in
the refrigerator/freezer compartment. Food
that has already cooled down increases
energy efficiency.
Allow frozen food to defrost in the
refrigeration compartment The coldness
of the frozen food reduces the energy
consumption in the refrigerator
compartment and thus increases the energy
efficiency.
Open the door only as briefly as necessary
to minimise cold loss. Opening the door
briefly and closing it properly reduces
energy consumption.
Setting the temperature no colder than
necessary contributes to optimal energy use.
The door gaskets of your appliance must
be perfectly intact so that the doors close
properly and energy consumption is not
increased unnecessarily.
9
EN
