Idiomas disponibles
Idiomas disponibles
ROUTINE MAINTENANCE
Before carrying out any routine maintenance operations, proceed as follows:
1.
Take the machine to the maintenance area.
WARNING: the place designated for this operation must comply with current regulations concerning safety at
work and current environmental protection regulations.
2.
Make sure the machine is in a safe condition, see
CAUTION: it is recommended to wear the appropriate PPE (Personal Protective Equipment), suitable for the
work to be carried out.
CLEANING THE RUBBER BLADES OF THE FRONT DUST GUARD KIT
(OPTIONAL)
To clean the rubber blades in the front dust guard kit, proceed as follows:
1.
Go to the front of the machine.
2.
Use a damp cloth to clean the side rubber blades (1) of the dust guard kit (Fig.1).
3.
Use a damp cloth to clean the central rubber blade (2) of the dust guard kit (Fig.2).
N.B.: when cleaning the rubber blades, check their condition and state of wear. If they are unfit to be used,
contact your HILLYARD service centre of reference or the one closest to you.
1
1
CLEANING THE RUBBER BLADES OF THE CENTRAL BRUSH DUST
GUARD
To clean the rubber blades in the central brush front dust guard kit, proceed as follows:
1.
Go to the left-hand side of the machine.
2.
Open the left inspection door (1) (Fig.1).
3.
Use a damp cloth to clean the left-hand bulkhead (2) in the machine frame (Fig.2).
4.
Use a damp cloth to clean the front flap (3) in the machine frame (Fig.3).
"MACHINE SAFETY" on page
2
2
66
66
29).
