Idiomas disponibles
Idiomas disponibles
9
7
6
3
N.B.: the suction motor is only started up when the central brush is in the working position.
N.B.: if the machine is stopped and the drive pedal (5) released while working, the central brush will
automatically move to the intermediate position (raised off the floor) after the DELAY RESET (BRUSHES
BRUSH MOT) time. To change this parameter, contact a HILLYARD service centre or refer to
RESET MENU (BRUSHES BRUSHMOTOR)" on page 27
MANUAL" consigned with the machine documentation.
N.B.: if the machine is stopped and the drive pedal (5) released while working, the side brushes will
automatically move to the position where they are raised off the floor after the DELAY RESET (OPTIONAL
OPT. BRUSH) time. To change this parameter, contact a HILLYARD service centre or refer to
RESET MENU (OPTIONAL BRUSH FUNCTION)" on page 32
CONFIGURATION MANUAL" consigned with the machine documentation.
N.B.: if you need to deactivate the side brushes while working in sweeping mode, press the SIDE BRUSH
CONTROL switch (9). The switch is on the membrane button pad (Fig.3).
N.B.: when the side brushes are in their idle position, the LED (7) on the switch will turn off (Fig.3).
8
4
5
4
in the "OPERATOR INTERFACE CONFIGURATION
in the "OPERATOR INTERFACE
44
44
5
"DELAY
"DELAY
