Idiomas disponibles
Idiomas disponibles
SIDE BRUSH
working simultaneously with the gearmotors in the
N.B.: if you want to bring the side brush supports back to their idle position, press the icon (1). When they
reach the position, the LED (2) will turn off.
N.B.: if the drive pedal (2) is released when working (Fig.2), after a few seconds the side brush holders are
automatically positioned in the rest position.
N.B.: if the brush head is raised with the side brush holders in the working position, the side brush holders
will also move into the rest position.
1
1
2
The machine leaves the factory with the right-hand side brush
only; the left-hand brush is an optional that can be requested.
The side brushes are an essential tool when the areas to be
cleaned feature shelves or other similar furniture.
The side brushes are able to extend beyond the total width of
the machine, thus being able to clean flush with the wall and
pass under shelves. In this way the entire room is cleaned in a
single passage, and nothing is left behind.
If you need to use the side brushes while working in sweeping
mode, press the SIDE BRUSH CONTROL icon (1) on the control
panel (Fig.1).
N.B.: when the side brush supports are in their working
position, the LED (2) will light up.
N.B.: by pressing the icon (1) the side brush holders will
begin to move towards the outside of the machine.
N.B.: the gearmotors in the side brush supports will start
brush head.
2
3
59
59
