Idiomas disponibles
Idiomas disponibles
LipuJet - P -RB / - RD / - RM / - RA / - RAP
Installation
21 = Screw
22 = Baffle plate
23 = Connector
24 = Sealing sleeve
25 = Connection port for on-site inlet pipe
26 = Inlet pipe
2.3.2 Inlet pipe assembly
IMPORTANT
Possible positioning of the inlet fitting:
Tighten the screw joints crosswise with a tightening torque of 20 N . m.
70/ 454
On-site inlet line in the direction of flow (inlet and outlet of
the grease separator) _ The inlet line is
axis of the tank
(Standard layout)
On-site inlet line from the right _ Inlet line
angles to the axis of the tank
On-site inlet line from the left _ Inlet line
angles to the axis of the tank
The inspection cover, sealing ring, washers, tooth lock washers and nuts are
supplied as loose items.
Heaviest single component is approx. 8 kg.
Numbers in brackets " [ ] ",
"Components".
27 = Connection port for tank ventilation on the right
(closed)
28 = Connection port for tank ventilation on the left
(closed)
29 = Connection port for the tank ventilation
parallel to the
is at right
is at right
Representation of the components _ Chap. 2.3.1
