Parkside PDSA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 35

Pulverizador a presión recargable de 12 y 20 v
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 136
Importer
Please note that the following address is not
a service address. Please initially contact
the service centre specified above.
Replacement parts/accessories
Spare parts and accessories can be obtained at
If you have issues ordering, please use the contact form.
If you have any other questions, contact the "Service-Center" (see page 34).
Item
9
7+8+22
6
1+2+3+23 Pistol grip, complete ................................................... 91106070
11
A
Trouble shooting
Problem
Machine does
not start
Even though the
tank is full, the
device does not
spray or sprays
at a low rate
Motor stops sud-
denly
www.grizzlytools-service.eu
Description .................................................. Product no.
Carrying strap ........................................................... 91106073
Spray lance with spray nozzle .................................... 91106072
Holder for spray lance ............................................... 91106071
Screw cap ................................................................ 91106068
Possible cause
Battery (21) discharged
Battery (21) not inserted
On/off switch (17) is bro-
ken
Spray nozzle (8) complete-
ly or partially blocked
Liquid too thick and therefo-
re unsuitable
Battery (21) empty
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
GERMANY
www.grizzlytools-service.eu
Remedy
Charge the battery (observe the separa-
te operating instructions for the rechar-
geable battery and charger)
Insert the battery (see "Inserting/remo-
ving the battery")
Repair by Service Centre
Clean spray nozzle
Remove liquid, clean spray lance and
container
Charge the battery
GB
IE
35
loading

Este manual también es adecuado para:

361647 2007