Parkside PDSA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 31

Pulverizador a presión recargable de 12 y 20 v
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 136
Charge level indicator
To check the charge of the battery during
operation, press the charge control button
(27).
The LEDs above it now show the current
charging status:
Green - battery charged
yellow - battery only partially charged
Red - battery is flat - please charge the
battery
Switching on/off
Make sure that the battery has been put in
correctly.
1. To switch on, move the on/off switch
(17) to position "I".
2. To switch off, move the on/off switch
(17) to position "O".
Adjusting the nozzle
The spray nozzle (8) is infinitely adjustable
from spray mist to jet.
Turning to the left from the user's view-
point = spray mist
Turning to the right makes the beam
selectively more intense.
Attention: you can also unscrew
the spray nozzle (8) if you turn it
too far to the right
Spraying
Note that recoil forces may occur
when pressing the trigger lever (2)
on the pistol grip (1). Always keep
a good hold on the pistol grip.
Always spray directly and solely onto the
plants or objects to be sprayed.
1. Press the trigger lever (2) on the pistol
grip (1) to spray.
2. The spray jet stops once you let go of
the trigger lever (2).
Point the spray nozzle at the surface to
be sprayed and press the trigger lever
(2) on the pistol grip (1) for several
seconds.
If the pump continues to run after you
have let go of the trigger lever, this
means there is too little water in the
container (10). Refill with water.
Cleaning
Do not spray the device with water
or clean it under running water.
There is a risk of electric shock and
the device could be damaged.
Switch the device off before cleaning
and remove the battery from the
device. Risk of electric shock!
Clean the device immediately after each
use.
GB
IE
31
loading

Este manual también es adecuado para:

361647 2007