KitchenAid KES6403 Guía De Producto página 16

2.
Phase 1: Place a container (~ 17 oz) on the Drip Tray below the Group Head. Press the
Clean Cycle "
to start first phase of decalcification cycle. Start/Cancel "
phase is complete. Empty the container.
3.
Phase 2: Place the container (~ 17 oz) below the Steam Wand. Then, press "
Start/Cancel "
complete. Empty the container.
4.
Phase 3: Place the container (~ 17 oz) below the Steam Wand. Empty, rinse and refill the
Water Tank with fresh water to Max fill line. Replace the Water Tank. Press "
Start/Cancel "
16
" button for 3 seconds or until clean light is solid. Then, press "
" and Water Mode lights will blink fast after the second phase is
" will blink fast after the third phase is complete. Empty the container.
1 2
1 2
1 2
" will blink fast after the first
" button
" button.
" button.