Idiomas disponibles
Idiomas disponibles
8. High Temp Button
When this option is selected, both the water
temperature and the washing time are
increased. High Temp led will be on.
9. Accela Wash Button
Select the Accela Wash option to help decrease
the duration of a cycle by raising water
temperature and pressure.
10. Quiet Wash Button
Select the Quiet Wash option to help reduce
the sound level of the washing operation by
lowering the pressure level of the water.
11. Start/Pause Button
After choosing the cycle and options, press
the Start/Pause button and close the door
within four seconds to begin the cycle. The time
remaining will be shown in the Time Remaining
Indicator. The total time may change due to the
ambient temperature, water temperature, and
soil on the dishes. It is best to avoid opening the
door while the dishwasher is running, but if it is
necessary to open the door, the cycle will pause
when the door is opened. If the door is closed
within four seconds after opening, the cycle will
continue automatically. If the door is opened for
longer than four seconds, the Start/Pause button
must be pressed and the door must be closed
within four seconds to resume the cycle.
12. Rinse Aid Indicator
When the rinse aid level is low, the rinse aid
indicator turns on, advising that the rinse aid
compartment needs to be filled.
13. End Cycle Indicator
When the cycle is completed, the end cycle
indicator will illuminate and the chime will
activate. The chime will sound five times each in
five minute intervals (at cycle completion, after 5
minutes, after 10 minutes, and after 15 minutes).
14. Sanitized Indicator
At the end of a successful sanitization, Sanitized
indicator will illuminate at the end of the cycle.
15. Delay Indicator
When cycle is started with delay, the Delay
Indicator will be on.
16. Upper Half Load Indicator
If you have dishes only in the upper rack, select
the half load upper rack option. If it is selected,
half load upper rack indicator will illuminate.
17. Lower Half Load Indicator
If you have dishes only in the lower rack, select
the half load lower rack option. If it is selected,
half load lower rack indicator will illuminate.
Note: If you have dishes both of in the upper
and lower rack , select the half load upper
rack and half load lower rack option together.
If it is selected, upper half load rack indicator
and lower half load rack indicator together
will illuminate. This mode will shorten the
length of cycle and reduce energy and water
consumption.
18. Cycle Time Indicator
Cycle duration can be monitored via Cycle Time
Indicator.
Changing a Cycle
Follow the steps below to change a cycle while
in operation.
Open the door and press the Start/Pause
button(11). Choose a new cycle
by pressing Cycle buttons(2). After cycle
selection, press the Start/ Pause button(11).
After closing the door within 4 seconds, the
newly selected cycle will resume the course of
the old cycle. If four seconds is exceeded and
the door is closed, the cycle will not resume. In
this case, open the door again, press the Start/
Pause button and then close the door within four
seconds to resume the cycle.
NOTE: Open the door slightly at first to stop
a wash cycle before it is complete in order to
avoid water spillage.
USA - CAN - 26
