Idiomas disponibles
Idiomas disponibles
2 INSTALLATION
WARNING: When installing the dishwasher, follow the
Installation Instructions provided with the product.
• Installation, maintenance and repair should be performed
by a qualified installer. Work by unqualified persons could
be dangerous and may void the warranty.
• Do not operate the appliance if damaged, malfunctioning,
partially disassembled or if it has missing or broken parts.
• Before installation or service, disconnect the power supply
to the work area by unplugging the unit, "tripping" the
circuit breaker or removing the fuse.
• Only connect the dishwasher to the power supply when all
installation and plumbing work is complete.
• Never connect the ground wire to gas lines, hot water
pipes or plumbing lines.
• Do not install or store the dishwasher where it can be
exposed to below freezing temperatures or exposed to
weather.
• Dishwasher must be secured to adjacent cabinetry using
the brackets provided. Failure to do this may cause
damage to property or bodily injury.
• Connect to a properly rated, protected and sized power
supply circuit to avoid electrical overload. The dishwasher
is designed for an electrical supply of 120 V (volts), 60
Hz (hertz), AC, connected to a dishwasher-dedicated,
properly grounded electrical circuit with a fuse or
breakers rated for 15 amperes.
USA - CAN - 12
