Pressure Problem (E8); Temperature Problem (E9); Call For Service (E5, E6, E7, E10, E13) - Covidien Kendall SCD 700 Serie Manual Del Usuario

If you are unable to resolve a problem, turn off the device and call your
medical equipment provider.

Pressure Problem (E8)

The pressure is too
high.
E8
A B

Temperature Problem (E9)

Error Screen Description
The
E9
temperature of
the Controller is
too low.
The
E9
temperature of
the Controller is
too high.
23
• Check that the tubing
is not blocked or
kinked.
Press the A and/or B
button(s) next to the
check mark
Troubleshooting
Press the Power button to
turn Controller to standby
mode.
• Allow the Controller
to warm to room
temperature.
Press the Power button to
turn the Controller back
on.
Press the Power button to
turn Controller to standby
mode.
• Make sure the Controller
is not covered by bedding
and that the fan port,
located near the power
cord is not obstructed.
• Allow the Controller to
cool to room temperature.
Press the Power button to
turn the Controller back
on.
Kendall SCD 700 Series
TM
If you are unable to resolve a problem, turn off the device and call your
medical equipment provider.
"Call for Service" Error (E5, E6, E7, E10, E13)
Error Screen Description
E5
The Controller
has an error that
requires service.
E6
E7
E10
E13
Kendall SCD 700 Series
TM
Troubleshooting
Press the Power
button to turn
Controller to standby
mode.
Call your medical
equipment provider.
24