SilverCrest SPG 2000 A1
9.2 Cleaning
DANGER! Unplug the mains plug from the mains socket
before you start to clean, there is the risk of electric shock!
DANGER! Wait until the grill has cooled down completely.
Otherwise there is risk of burn injury!
DANGER! Never immerse the grill itself in water, there is a
risk of electric shock!
Cleaning the grill plate [6]
When cleaning the grill plate [6], make sure that the power plug has been disconnected from the
mains socket!
Unplug the thermostat [2] from the socket [4].
Start by using kitchen roll or similar to remove the worst of the residues. Then use a cloth which has
been dampened in washing-up liquid and warm water. Rinse with clean water and then dry the grill
plate [6] thoroughly. You can also clean the grill plate [6] under running water. The device must be
completely dry before it can be used again. Never use any wire brush or scrubbing objects.
Cleaning the grease collection tray [5]
The grease collection tray [5] can be removed for cleaning. To do this, carefully remove the grease
collection tray [5] from the grill. Dispose of the fat in it. You can clean the grease collection tray [5]
in the dishwasher or wash it up with washing-up liquid and warm water. Rinse the grease collection
tray [5] out with clean water and dry it carefully before returning it to the grill.
Cleaning the frame and the thermostat [2]
When cleaning the thermostat [2], make sure that the power plug has been disconnected from the
mains socket!
Unplug the thermostat [2] from the socket [4].
To clean the frame and the thermostat [2], use a slightly dampened cloth. Never use any solvents
or cleaners that may damage the plastic. If necessary, use a little washing-up liquid or water.
Rinse with clean water, then carefully dry the frame and the thermostat [2] and only use the device
again when it is completely dry.
28 - English