Idiomas disponibles
Idiomas disponibles
qonm
@ PIONcER:
8
<ARE7096>
En
CONFIRM SUPPLIED ACCESSORIES
@ Remote control unit x 1
(2) AA/REP dry cell batteries x 2
@ AM loop antenna x 1 (shown assembled)
4) FM antenna x 1
© CD case stand x 1
| see!
It's convenient to match the disc case number with the
number of the disc loaded in the unit.
Note!!
Some disc cases (like two-disc cases) may not fit.
LOADING BATTERIES INTO
REMOTE CONTROL UNIT
Open the battery compartment cover on the back of the remote
control unit.
Insert size AA/R6P dry cell batteries into the battery compartment
in accordance
with the indications
(@®, ©) inside the
compartment.
Close the cover of the battery case.
Incorrect use of batteries may lead to leakage or rupture. Always
be sure to follow these guidelines:
A. Always
insert batteries
into the battery compartment,
correctly matching the positive @ and negative © polarities,
as shown by the display inside the compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on brand. Do not mix different brands of batteries.
REMOTE CONTROL OPERATIONS
The remote control unit can be used within a range of approx.
7 meters from the remote sensor, and within angles of up to
approx. 30 degrees.
elf the remote control sensor window is in a position where it
receives strong light such as sunlight or fluorescent light,
control may not be possible.
