Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Head
Cabeza
Capstans
Pinch
roll
Eje de motor
Oe
aia
e
+ Gag
Le
Rodillo de presion
ER te Sti
e The illustration shows TAPE I.
e La ilustracidn muestra TAPE I.
e fa PAI
Awa
(TAPE 1)
64
<ARE7096>
En
| Cleaning the head section
|
The head, capstans and pinch rollers are parts which are liable
to get dirty quite easily. In particular, if the heads are dirty, the
high frequency components of the sound will not be reproduced
and the stereo
balance
will be impaired,
resulting
in a
deterioration of sound quality. It is therefore recommended that
the head section be cleaned regularly.
1. Turn the power off.
2. Press the Eject button (4) to open the cassette door.
3. Dip a cleaning swab into head cleaning fluid and use it to
wipe the head, capstans and pinch rollers. Wait 2-3 minutes
until the cleaning fluid dries.
NOTE:
This unit uses a head-slant standby system, with the result that
the heads are mounted at an angled position.
Demagnetizing the cassette deck heads
The deck heads may become
magnetized after the deck has
been used for a long period of time, or if a magnet or other
magnetized object (screwdriver, etc.) is brought near the heads.
Magnetization
of the heads
results in increased
noise and
reduced ability to reproduce high-frequency sounds.
In this case,
please
use
a commercially
available
head
demagnetizer at regular intervals to eliminate the magnetic
field on the heads. When using a head demagnetizer, turn this
unit's power switch ON. In order to prevent adverse
effects on
the receiver and speakers, however, be sure to turn down the
receiver's volume control to its lowest position, and disconnect
any headphones from their headphones jack. For details, consult
the instructions accompanying your head demagnetizer.
Maintenance of external surfaces
|
e@ Use a polishing cloth or dry cloth to wipe off dust and dirt.
@When the surfaces are dirty, wipe with a soft cloth dipped in
some neutral cleanser diluted five or six times with water, and
wrung out well, and then wipe again with a dry cloth. Do not
use furniture wax or cleaners.
eNever
use thinners, benzine,
insecticide sprays or other
chemicals on or near this unit, since these will corrode the
surfaces.
