CONNECTIONS
Second CD player, etc.
Segundo reproductor de disco compacts (CD), etc.
FARES
FM antenna
Antenna FM
FMR
BEAR
SPEARERS
Front speaker {R}
Altavoz delantero (D)
Bl eat 8(4)
10
<ARE7096>
En
To the AC wail socket
A la toma de corriente de la pared
Bia lene Ss
Surround (rear) speaker system
(Sold separately)
yy
Sistema de altavoces de sonido envolvente (trasero)
(Se vende separadamente)
SBS (SH) Maa
(AINE)
AM loop antenna
Antenna de cuadro de AM
Front speaker (L)
Altavoz delantero (I)
Bi Bie St (Zz)
Before making or changing the connections, switch
off the power switch and disconnect the power
cord from the AC outlet.
e Use this unit on a flat surface.
e@ Be sure to connect an antenna. If you do not, broadcast signal
reception will not be possible.
1. Connect AM loop antenna and FM antenna to the unit's
antenna terminals.
2. Connect the speaker cords to the SPEAKERS terminal.
Connect the red cords to the "+" (red) terminals and the black
cords to the "—" (black) terminals.
@® Twist the wire strands.
@ Push away the tab and insert the cord into the terminal.
@ Pull back the tab. Be sure to tighten the cords firmly.
NOTE:
Do not allow the conductors of the cords to project out of the
terminals or to come into contact with other conductors. A
breakdown or failure may occur when conductors touch.
Notes for S-P470V:
This speaker system is magnetically shielded.
However, depending on the installation location, color distortion
may occur if the speaker system is installed extremely close to
the screen of a television set.
lf this happens, turn off the power switch of the television set,
and then turn it on after 15 to 30 minutes.
lf the problem persists, place the speaker system away from the
television set.
Lubrication is used in this unit's speakers. Do not touch it
with your hands or a cloth as this may degrade performance.
If you do get the lubrication on your hands, immediately
wash it off with detergent.
Speaker impedance
Connect speaker systems with a nominal
impedance
range
from 8 Qto 16Q.