Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cautions
The ceramic hob must be installed by qualified personnel
1.
or technicians. We have professionals at your service. Please
never conduct the operation by yourself.
The ceramic hob shall not be mounted to cooling equipment,
2.
dishwashers and rotary dryers.
The ceramic hob shall be installed such that better heat radiation
3.
can be ensured to enhance its reliability.
The wall and induced heating zone above the table surface shall
4.
withstand heat.
To avoid any damage, the sandwich layer and adhesive must be
5.
resistant to heat.
A steam cleaner is not to be used.
6.
A board is must to be installed underneath the hob.
7.
4
Power line connection
The socket shall be connected according to the relevant standard
or connected to a single-pole cut-out. 30 minimum supply.
The method of connection is shown in Figure (3):
PE
connect to the main power supply
220-240V 2+2N~
The installer must ensure that the correct electrical connection has
been made and that it complies with wiring rules.
If the cable is damaged or to be replaced, the operation must be
carried out the by after-sale agent with dedicated tools to avoid
any accidents.If the appliance is being connected directly to the
mains an omnipolar circuit-breaker must be installed with a
minimum opening of 3mm between contacts. The installer mus t
ensure that the correct electrical connection has been made and
that it complies with wiring rules.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised
technicians only.
N2
N1
L2
L1
220-240V
220-240V
Figure (3)
N
PE
220-240V
connect to the main power supply
220-240V
4
L
Tabla de contenido
