Idiomas disponibles
Idiomas disponibles
Safety instructions when using long drill
bits with rotary hammers
Always start drilling at low speed
and with the bit tip in contact with
the workpiece. At higher speeds, the bit
is likely to bend if allowed to rotate freely
without contacting the workpiece, resulting in
personal injury.
Apply pressure only in direct line
with the bit and do not apply
excessive pressure. Bits can bend,
causing breakage or loss of control, resulting
in personal injury.
˜ Additional safety information
Use suitable detectors to determine
if there are hidden supply lines or
contact the local utility company for
assistance. Contact with electric cables can
cause fire and electric shock. Damaging gas
lines can lead to explosion. Breaking water
pipes causes property damage.
Always wait until the power tool
has come to a complete stop before
placing it down. The application tool
can jam and cause you to lose control of the
power tool.
Secure the workpiece. A workpiece
clamped with clamping devices or in a vice is
held more secure than by hand.
Do not touch any application tools
or adjacent housing components
shortly after operation. These can
become very hot during operation and cause
burns.
The application tool may jam during
drilling. Make sure you have a stable
footing and hold the power tool
firmly with both hands. Otherwise you
could lose control of the power tool.
28 GB/IE
Hold the power tool firmly with both
hands and make sure you have a
stable footing. The power tool can be
more securely guided with both hands.
Original accessories/auxiliary
equipment
m
WARNING!
Do not use accessories not recommended
u
by
. This may result in electric
shock or fire.
Only use the accessories and additional
equipment that are specified in the operating
instructions and compatible with the product.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety warnings and follow them to the letter. This
will help to prevent risks and hazards.
Always be alert when using this product, so
that you can recognise and handle risks early.
Fast intervention can prevent serious injury
and damage to property.
Switch the product off if there are
malfunctions. Have the product checked
by a qualified professional and repaired, if
necessary, before you operate it again.
˜ Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain. The
following dangers can arise in connection with the
structure and design of this product:
Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
