Idiomas disponibles
Idiomas disponibles
HAMMER DRILL
˜ Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information
concerning safety, use and disposal. Before using
the product, please familiarise yourself with all
of the safety information and instructions for use.
Only use the product as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.
˜ Intended use
This hammer drill (hereinafter "product" or
"electric tool") is designed for:
–
hammer drilling into concrete, brickwork
and stone
–
light chiselling work
–
drilling into wood, plywood, fiberboard
plastic and metal
The product is not intended to handle heavy
drilling works exceeding the maximum drilling
capacity (see "Technical data"). Always
use the correct type of bit and accessories
according to the intended use. Observe
the technical requirements of this product
(see "Technical data") when purchasing and
using accessory tools!
Any other use or modification of the product
are considered improper use and can result
in hazards such as death, life-threatening
injuries and damage.
The manufacturer is not liable for any
damages caused by improper use.
The product is exclusively intended for
domestic use.
The product is not intended for commercial
use or for similar uses.
Observe all applicable local safety
regulations, standards and ordinances. The
use of noise emitting power tools may be
restricted to certain times by national or local
regulations.
˜ Scope of delivery
m
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
1 Hammer drill
3 150 mm drill bit 6/8/10 mm with SDS-Plus
fitting
1 13 mm keyless chuck for round shank drill bits
(SDS-Plus fitting)
1 250 mm flat chisel 14 mm
1 250 mm pointed chisel
1 Metal depth stop
1 Auxiliary handle
1 Carrying case
1 50 g drill chuck grease
(Model number: HG06348)
1 Short manual
˜ Description of parts
Before reading, unfold the page containing
the illustrations and familiarise yourself with all
functions of the product.
(Fig. A)
Depth stop screw
1 ]
[
Rotation direction switch
2 ]
[
On/off switch
3 ]
[
Lock button (for on/off switch
[
4 ]
Mains cord with mains plug
[
5 ]
)
3 ]
[
GB/IE
23
