Idiomas disponibles
Idiomas disponibles
ENGLISH
Compressor
does not
work..
The remote
control does
not work.
The display
shows "E1".
The display
shows "E2".
1. Service information
1.1 Area verification
Before starting work on systems containing flammable refrigerants, safety checks are
necessary to ensure that the risk of ignition is minimised. Before repairing the cooling
system, the following precautions must be observed:
1.2. Work procedure
The work must be carried out in accordance with a controlled procedure to minimise
the risk of a flammable vapour or gas being present while the work is being carried
out.
1.3. General workspace
All maintenance personnel and others working in the area should be briefed on the
nature of the work to be carried out. Work in confined spaces must be avoided. The
area around the workspace should be divided into sections. Ensure that conditions
within the workspace are safe by keeping flammable material under control.
1.4. Refrigerant verification
The area should be checked with an appropriate refrigerant detector before and
48
EVVO VENTILADOR PORTÁTIL CLIMA P12 FRÍO Y CALOR
There is frost.
Protection against
overheating system is
activated.
There is too much distan-
ce between the machine
and the remote control.
The remote control is not
aligned with the direction
of the remote control
receiver.
Batteries are dead.
The room temperature
sensor is abnormal.
The pipe temperature
sensor is abnormal.
Wait for 3 minutes until
the temperature is
lowered, and then restart
the appliance.
Let the remote control
get close to the
air conditioning, and
make sure that
the remote control direct-
ly faces to the
direction of the remote
control receiver.
Replace batteries.
Contact the official Tech-
nical Support
Service of EVVO.
Contact the official Tech-
nical Support
Service of EVVO.
