Idiomas disponibles
Idiomas disponibles
ENGLISH
decrease icons to select the desired operating time.
The timer can be set from 1 to 24 hours, and the digits increase and decrease by 1 hour.
Oscillation
Press this button to activate the air oscillation.
Drainage instructions
When the air conditioner stops operating because the water tank is full, turn it off and
unplug it from the power supply. The full tank indicator (FULL) will start blinking and
the appliance will not operate until the water inside the tank is drained.
Manual drainage. Fig. 10
1. Place a container below the water outlet behind the body.
2. Unscrew the drain cap and unplug the water plug. The water will automatically flow
into a container.
NOTE:
Move the device carefully, so as not to spill the water in the water tank at the bottom
of the body.
Keep the drain cap and the water plug properly.
During drainage, the body can be tilted slightly backwards.
If the water container cannot hold all the water, before the water container is full, stuff
the water outlet with the water plug as soon as possible to prevent water from flowing
to the floor or the carpet.
When the water is discharged, re-tighten the water plug and tighten the drain cap.
Restart the appliance after the plug and cap are installed, otherwise condensed water
43
EVVO VENTILADOR PORTÁTIL CLIMA P12 FRÍO Y CALOR
