Idiomas disponibles
Idiomas disponibles
ENGLISH
control.
On/Off (Remote control)
When the device is turned on, it will beep and enter standby mode. Touch the power
icon to turn the device on and off.
Mode
Press the mode icon to switch between cooling, fan, and dehumidification modes.
Note: when the appliance is running in cooling and dehumidification mode, the
condensate drainage will be done through the upper condensate outlet. When the
device is running in heating mode, the condensate drainage will be done through the
lower condensate outlet.
Note: when changing from heating mode and vice versa, the appliance will take
some time to change from one mode to the other. It may take a few minutes for the
appliance to start running normally again.
Sleep mode
In cooling mode, press the increase and decrease icons to activate the Sleep mode.
The device will operate saving energy and silently.
Increase and decrease icons
Use these icons to increase or decrease temperature and time.
Temperature cannot be increased or decreased in fan or dehumidification mode.
Unit switch: (Remote control)
Press the button to switch between ºC and ºF.
Fan speed
Under the cooling mode, press the iconto select high or low wind speed operation.
This option is not available under the dehumidification mode.
NOTE:
Under certain conditions (defrost), it may not operate at the selected speed.
Timer
Press this iconto set the timer. When the timer symbol blinks, use the increase and
42
EVVO VENTILADOR PORTÁTIL CLIMA P12 FRÍO Y CALOR
(Remote control)
