Idiomas disponibles
Idiomas disponibles
► Before storing the foods such as tortillas, crepes or hamburger, use wax or parchment
paper between them to stack the pieces, this will be easier to remove some of the
food, reseal the rest and immediately replace in the freezer.
► The vacuum preservation system can't be directly used for the vacuum sealing of
canisters or canning jars.
16.5 Making a bag using the bag roll
1. Unroll the foil to the desired length and cut the bag to the appropriate length with
precise and clear cut.
2. Open the lid and put one end of the bag on top of the black rubber strip, then close the
cover (see Step 1).
3. Press the cover down heavily on both sides by using two hands until two click sounds
heard (see Step 2).
4. Press the "Schweißen"-Button (B) and the corresponding LED control light starts
flashing.
5. When the LED light turns off, the bag is sealed.
6. Now you have a custom-sized bag.
► Make sure that the bag you want to use is at least 8cm/3.1in. longer than the food.
Add another 2 cm/0.8in. each time the bag is re-used.
Use of the function "selectable welding time"
16.6
When there are fluids in the bag and hence in the section where you want to seal it, the
welding procedure should be adjusted to "feucht". This would increase the welding time
and the bag is safely sealed. Press the button "trocken & feucht". If the lamp will illuminate
above "feucht", the welding time for moist vacuum food is adjusted.
16.7 Open a sealed bag
Cut the bag straight across with scissors, just inside the seal.
16.8 Storing your vacuum sealing system
Keep the unit in a flat and safe place, out of the reach of children.
► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.
► To disconnect remove the plug from the outlet.
► Always unplug this appliance from the electrical outlet immediately after using and
before cleaning.
Please note
Please note
Please note
41
