CASO DESIGN IceChef Compact Manual Del Usuario página 73

Máquina de cubitos de hielo
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 75
5.2 Troubleshooting table
If an error occurs, then an error code will appear on the control panel display. It describes the
reason for the error.
Problem
The appliance does not
turn on.
indicator lights up.
ADD WATER
indicator lights up.
ICE FULL
The compressor is making
strange noises.
Ice making cycle is normal
but no ice formed.
All the control lights are
flashing.
PLEASE NOTE
f
If you cannot solve the problem by carrying out the steps described above, our
Customer Service will help you free of charge.
f
Clean the device before you send it to customer service.
6 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for
their functionality and safety. If these were put in the non-recyclable waste or
were handled incorrectly, they could be detrimental to human health and the
environment. Therefore, do not put your old device into the non-recyclable
waste under any circumstances.
Possible cause
Mains plug not plugged in.
Lack of water.
Ice is full in basket.
The supply voltage is too
low.
Room temperature or water
temperature in inner tank is
too high.
Not enough cooling agent
in the coolant reservoir or
a part of the electronics is
defect.
The device is blocked with
ice or the motor is damaged.
Solution
Plug in the mains plug.
Press the "On/Off" button
and fill water into the tank.
After you have filled the
tank, press the "On/Off"
button again to restart the
device.
Remove ice from ice basket.
Turn the device off and
check the supply voltage.
The recommended room
temperature is 10 °C to 32 °C.
Contact your customer
service.
Contact your customer
service.
CASO IceChef Compact
DE
EN
ES
SV
FR
IT
NL
RU
PT
TR
HE
AR
73
loading

Este manual también es adecuado para:

3401