Idiomas disponibles
Idiomas disponibles
EN
SPRAYING TECHNIQUE
5
SPRAYING TECHNIQUE
•
The key to a high-quality result is the even coating of the
entire surface. Move your arm at a uniform speed and hold
the spray gun at a constant distance from the surface. The
ideal distance is around 10-25 cm between the spray nozzle
and the surface. (Fig. A)
•
Hold the spray gun parallel to the surface. Move the gun using
your entire arm, not just the wrist. (Fig. B)
•
Hold the spray gun at right angles to the surface. Otherwise the
coating will be thicker at one end than the other. (Fig. C)
•
Pull the trigger guard once you have started the movement.
Release the trigger again before you nish the movement.
(Fig. D) Avoid interruptions within the spray surface.
•
Allow each stripe to overlap by around 30%. This will ensure
even coating. (Fig. E)
•
Use the lowest possible pressure setting to create the desired
spray pattern in order to minimise spray mist.
•
To achieve perfect surfaces at varnishing works, special
accessories are available at Wagner, e.g. FineFinish tips. Your
Wagner dealer will advise you.
38
A)
B)
10-25cm
C)
D)
10-25cm
E)
30% overlap
Super Finish 21 Pro
10-25cm
10-25cm
