Medion X20 SW+ Manual De Instrucciones página 151

11.4. Cleaning the sensors and
charging contacts
Clean the sensors and charging contacts
monthly.
 Remove dirt and dust with a suitable
cloth
– from the front sensor
– from the drop sensors
– from the charging contacts of the
robot vacuum and mop and the dust
collector.
Fig. 25 – Cleaning the front sensor
Fig. 26 – Cleaning drop sensors
Fig. 27 – Cleaning charging contacts
11.5. Cleaning the suction
opening and brush
Dirt and dust can accumulate around the
suction opening and impurities collect on
the brushes, impairing the suction power.
Therefore, clean the suction opening
regularly and the brushes weekly.
 Switch off the appliance and place it on a
level surface.
Fig. 28 – Removing the brush frame
 Press both locking tabs on the brush
frame inwards and lift the brush frame
off.
Fig. 29 – Removing the cleaning brush
 Remove the cleaning brush from the
suction opening.
 Remove dirt and dust from the suction
opening.
Fig. 30 – Cleaning the brush
DE
FR
NL
ES
IT
EN
153