Medion X20 SW+ Manual De Instrucciones página 143

6. Preparing the robot
vacuum and mop
 Remove the transit bolts from both sides
of the robot vacuum and mop.
Fig. 6 – Removing the transit bolts
 Turn the robot vacuum and mop over.
 Attach the left side brush (L) and the right
side brush (R) to the left and right drive
shafts of the robot vacuum and mop
while applying light pressure until you
hear them click into place.
Fig. 7 – Attaching side brushes
6.1. Sett ing up the charging
station
 Position the station on a wall with a level
surface and avoid direct sunlight.
Fig. 8 – Location
 Ensure that the required clearance of
approx. 0.5 m to the sides and approx. 1.5
m to the front is maintained and that the
charging contacts for the robot vacuum
and mop are freely accessible.
50 cm
Fig. 9 – Appliance clearance
 Insert the mains plug into the mains
socket.
 Remove all fragile items (e.g. glass, lamps,
vases) and objects that could become
trapped in the brushes or sucked up (e.g.
cords, clothing, newspapers, curtains)
from the working area before operating
the device.
50 cm
150 cm
145
DE
FR
NL
ES
IT
EN