belt is not twisted and that the shoulderbelt guide is closed again to
keep the belt inside. (11)
9. The seat is delivered with removable SIP+ (side impact protection
+). This extra side impact protection should be used on the door side
of the vehicle. It can be connected on the outside of the side bumper
in 2 slots. The seat already offers high level integrated side impact
protection. This extra side impact protection improves the protection
in a side impact still further. (12)
10. Do not use the SIP+ on the seat when the space between seat and
door of the vehicle is too small, which might lead to a situation where
the seat is not positioned correctly on the vehicle seat.
Positioning of the child
1. Adjust the headrest to the correct height by turning the height adjuster
handle. (13) Make sure that the shoulder belt is level with your child's
shoulder. (14)
2. The seat can be positioned in 2 positions by pulling the reclining
handle upwards and pushing the seat forwards or backwards. Position
the seat in the correct position before positioning the child with the
vehicle belt. (15)
3. Position the vehicle belt in front of the child and lock the belt into the
buckle of the vehicle. (16, 17)
4. BeSafe recommends to use the lapbelt guider to keep the child seated
in the optimum upright position. To use the lapbelt guider position the
lapbelt through the lapbelt guider.
5. The PAD+ must be used around the shoulder vehicle belt and
positioned between the chin and the chest of the child.
6. Remove slack in the belt by pulling the belt towards the retractor. (18)
Removing the seat
1. Remove the shoulderbelt out of the shoulderbelt guide by pushing
the shoulderbelt lock in the guider up and slide the belt out. (19, 20)
2. Pull the ISOfix release handle to release the ISOfix connectors. (21)
In this way the base of the seat can move forwards and the ISOfix
release buttons can be operated. (22)
3. Release both ISOfix connectors, by pushing down the release buttons.
(23) Slide the arms with ISOfix connectors inside the seat before you
remove the seat from the vehicle. To be able to slide the arms with
ISOfix connectors inside the seat, press the button (between the red
marks) on top of the ISOfix release handle down.
4. Remove the seat from the vehicle.
11
