Medela LACTINA Instrucciones Generales página 8

1 1 0 0
Insert other ends of tubing
into openings on pump
connector.
1 1 1 1
If single pumping: insert
plug into unused port.
1 1 2 2
Set the vacuum regulator
to "MINIMUM." Adjust for
comfort once pumping
begins.
1 1 3 3
Center breastshields over
your nipples and start
pumping.
Important note: If you experience discomfort, contact your lactation
professional as you may need a different size breastshield or other
device. To locate Medela products or a breastfeeding specialist in your
area, call 1-800-TELL-YOU or visit www.medela.com.
12
Manual Breastpumping
You will be able to pump manually with the following
electric breastpump accessory kits: Manualelectric
Breastpump #67100(S), Universal Pumping System
#67093(S) and the Lactina Pumping System #67094(S).
1 1
Follow cleaning instructions on pages 2-4.
2 2
Slip rubber seal onto piston
until it snaps into place—the
larger side faces the handle.
To ensure proper seal, hold
rubber seal firmly and twist
piston.
3 3
Slide vacuum regulator ring
onto cylinder, if not already
done. Push handle end of
piston into cylinder.
4 4
Screw cylinder into back of
connector/breastshield.
5 5
If 2-piece breastshield
assembly: Make sure breast-
shield and connector are
securely attached.
13